Saniflow MEDIFLOW KT0010CS Stainless Steel Satin Recess Kit

(No reviews yet) Write a Review
Usually ships in 24 hours
13.00 LBS
Calculated at Checkout
Free Shipping via UPS Ground orders $155+ (cont.US)
  • MEDIFLOW Series KT0010CS Stainless Steel Satin Recss Kit for Mediflow Hand Dryer from Saniflow
  • Saniflow KT0010CS Recess Kit Side profile


MEDIFLOW Series KT0010CS Stainless Steel Satin Recess Kit for Mediflow Hand Dryer from Saniflow

  • Saniflow recess kit for Mediflow® hand dryer (hand dryer not included).
  • Maximum robustness and vandal proofness.
  • Excellent integration and aesthetically pleasing.


The kit for recessed Mediflow® makes the Mediflow® hand dryer suitable for the compliance of the ADAAG norm (US) that limits to 4 the horizontal projection of the devices installed in bathrooms for public use, bestowing on that hand dryer the quality of specific for the disabled.


Color/Finish  Satin
Casing construction  Stainless Steel
Unit dimensions  Cabinet:   16-3/4 H x 11-5/8 W x 3 D
 Frame:   18-7/8 H x 13-3/8 W x 1/16 D



MEDIFLOW® RECESSED ADA KIT. When installing a new bathroom facility in a newly constructed building it is extra important to conform to ADA specified rules & regulations. If you are including the required automatic hand dryers, you will want to pay attention to the regulations regarding their installation. One of the most important regulation with an ADA hand dryer is its depth from the wall. ADA hand dryer specifications state that the restroom hand dryers must not protrude from the wall more than 4 inches located in the circulation path of each bathroom. This ADA compliant Mediflow hand dryer recess kit is available in stainless steel bright, satin and white.

Components & Materials

    • Electro-zinced iron cabinet, 1/16 thick, with 16 screw holes of Ø 1/4 for mounting on the wall, it includes 4 M5 bolts welded on top of the base plate for the fitting of the Mediflow hand dryer.
    • Grey rubber seal, offers a reinforcing outside protection that minimizes vibrations and noise.
    • Stainless steel AISI 304 frame, 1/16 thick, bright finish, with 4 screw holes of Ø 23/64 for mounting on the wall.
    • Nuts and bolts for the fitting of the dryer to the kit and the frame to the wall included: 4 nuts DIN 934 M5, 4 washers DIN 125 M5, 4 stainless steel screws DIN 7981 1-9/32 x 3/16 and 4 wall plugs F8.

NOTE: The nuts and bolts for the mounting of the cabinet to the wall are not included. The use of stainless steel nuts and bolts is recommended.

 pdficon-small.gif   Saniflow Mediflow Series Hand Dryer - Spec Sheet

View AllClose

Warranty Information

5-year limited warranty
View AllClose